3314892 - 5540C44 bar for front sensor for correcting/aligning gas discharge lighting units r r

Removing ( Refitting ) Position the vehicle on the ramp1. Undo the nuts (1a) and remove the connecting rod for the exhaust gas light cluster alignment front sensor (1b).2. Undo the nut (2a) and remove the mounting bracket (2b) for the exhaust gas light cluster alignment front sensor connecting rod. Refitting ( Removing ) Place the mounting bracket for the exhaust gas light cluster alignment front sensor connecting rod back in its housing and secure it using the nut.Place the connecting rod for the exhaust gas light cluster alignment front sensor back in its housing and secure it using the nuts.Remove the car from the ramps. - 5540B38  headlamp/light cluster light beam - position . Removing ( Refitting ) Position the vehicle on a lift and raise it.1. Working under the left front suspension, undo the connecting rod fixing nuts.2. Remove the link.3. If necessary, remove the bracket (3a) for the connecting rod, after having undone the nut (3b). Refitting ( Removing ) Check that the link is not damaged.If removed, position the bracket and secure it using the nut. Position the connecting rod and secure it using the nuts.Remove the car from the ramps.