3314894 - 5540C48 bar for rear sensor for correcting/aligning gas discharge lighting units r r

Removing ( Refitting ) Position the vehicle on the ramp1. Undo the nuts (1a) and remove the exhaust gas light cluster alignment rear sensor connecting rod (1b).2. Undo the bolt (2a) and remove the exhaust gas light cluster alignment rear sensor connecting rod mounting bracket (2b). Refitting ( Removing ) Place the exhaust gas light cluster alignment rear sensor connecting rod mounting bracket back in its housing.Place the exhaust gas light cluster alignment rear sensor connecting rod back in its housing and secure it using the nuts.Remove the car from the ramps. - 5540B38  headlamp/light cluster light beam - position . Removing ( Refitting ) Position the vehicle on a lift and raise it.1. Working under the left rear suspension, undo the connecting rod fixing nuts.2. Remove the link.3. If necessary, remove the bracket (3a) for the connecting rod, after having loosened the bolt (3b). Refitting ( Removing ) Check that the link is not damaged.If removed, position and bracket and secure it using the bolt.Position the connecting rod and secure it using the nuts.Remove the car from the ramps.