3314177 - 1084A42 engine oil pressure warning light switch - r + r (Automatic transmission)

Removing ( Refitting ) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 7055B54  under-engine guard - r r . 1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Name	Connector
1	Insufficient engine oil pressure (switch) sensor	K30

2. Undo and remove the engine oil pressure warning light switch. Refitting ( Removing ) Fit the engine oil pressure warning light switch and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	OIL PRESSURE W/L	M14	Engine crankcase side 2.0 - 2.5

Connect the electrical connection to the engine oil pressure warning light switch. - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal.Remove the vehicle from the ramp.