3314771 - 5040A40 air conditioner condenser - r+r
|  | Follow the safety instructions ( See assembly 5040A air conditioner coolant circuit ). | 
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	 - 5040A10  Air conditioning refrigerant
CIRCUIT - Draining and Refilling
                                           .
                                        - 7055B39  front additional wheel arch half (one), lh or rh,
front element - r r
                                           .
                                        - 7055A43  central front grille - r r - 7055A41  RIGHT FRONT GRILLE - R.R.
                                           .
                                        - 7055B10  Front BUMPER - R.R.
                                           .
                                        - 7040D12  engine front side cover (one) lh or rh - r r
                                           (right
and left).
                                        - 7040D30  engine bay front beam cover - r r
                                           .
                                        - 7025A34  bonnet lid lock (one) - r+r or repair
                                           .
                                       - 7090G06 HEADLAMP HOUSING CONNECTING CROSSMEMBER - Replace. 
                                           .
                                       1. Undo the bolts (1a) and disconnect the inlet and outlet pipes
(1b) from the air conditioning condenser.Recover the O-Ring seals.
		)
	 - 5040A10  Air conditioning refrigerant
CIRCUIT - Draining and Refilling
                                           .
                                        - 7055B39  front additional wheel arch half (one), lh or rh,
front element - r r
                                           .
                                        - 7055A43  central front grille - r r - 7055A41  RIGHT FRONT GRILLE - R.R.
                                           .
                                        - 7055B10  Front BUMPER - R.R.
                                           .
                                        - 7040D12  engine front side cover (one) lh or rh - r r
                                           (right
and left).
                                        - 7040D30  engine bay front beam cover - r r
                                           .
                                        - 7025A34  bonnet lid lock (one) - r+r or repair
                                           .
                                       - 7090G06 HEADLAMP HOUSING CONNECTING CROSSMEMBER - Replace. 
                                           .
                                       1. Undo the bolts (1a) and disconnect the inlet and outlet pipes
(1b) from the air conditioning condenser.Recover the O-Ring seals.|  | Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system. | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Place the condenser back in
its housing and fix it to the engine coolant radiator using the
bolts.Connect the air conditioning condenser
inlet and outlet pipes and fix them using the bolts.
		)
	Place the condenser back in
its housing and fix it to the engine coolant radiator using the
bolts.Connect the air conditioning condenser
inlet and outlet pipes and fix them using the bolts.|  | Replace the O-Ring seals for the connectors. Only use green coloured seals, resistant to R134A coolant fluid. Lubricate the threads of the connectors using anti-freeze. | 
|  | Follow the safety instructions ( See assembly 5040A air conditioner coolant circuit ). | 
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-).
		)
	Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-).
  |  | Name | Connector | 
|---|---|---|
| - | Battery | A1B | 
|  | Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system. | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Place the air conditioning condenser complete
with drier filter back in its housing and secure it using the bolts.Connect the coolant inlet and outlet pipes
to the air conditioning condenser and tighten the bolts to the recommended
torque.
		)
	Place the air conditioning condenser complete
with drier filter back in its housing and secure it using the bolts.Connect the coolant inlet and outlet pipes
to the air conditioning condenser and tighten the bolts to the recommended
torque.|  | Replace the O-Ring seals for the connectors. Only use green coloured seals, resistant to R134A refrigerant. Lubricate the thread of the connectors using anti-freeze. | 
|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Bolt | PIPES FROM COMPRESSOR TO CONDENSOR | M6 | (Condenser side) 0.7 ÷ 1.1 | 
|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Bolt | PIPE FROM CONDENSER TO MULTI-STAGE VALVE. | M6 | (Condenser side) 0.7 ÷ 1.1 |