2752887 - 5040B64 sensor on evaporator for a/c ecu - r + r
 | Before working on the Air Bag system, the following preliminary operations must be carried out: (1) turn the ignition OFF and extract the key; (2) disconnect the battery terminals and insulate (3) wait for at least 10 minutes before proceeding. |
 | FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM) |
Removing
(
Refitting
)
- 5580C18 air bag module - r+r | Before removing the steering wheel, position the wheels as parallel as possible to the longitudinal axis of the vehicle. |
Refitting
(
Removing
)
Position the sensor on the
evaporator for the air conditioning system control unit. - 5040C26 evaporator unit condensate collection tank - r r - 7040A98 instrument facia trim support beam - r r with facia
removed - 7210E36 R.R. FRONT SIDE DOOR - 7040L42 sill plate connection of one front door (1), lh or
rh - r r - 7040A10 instrument facia trim - r+r - 7040A17 air conditioner controls - 5020B22 heater control support control (one) - arrange - 7040A56 switch panel/support(push buttons)-r r - 7040A72 UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R
. - 7040A78 radio compartment box r r - 5580C22 AIR BAG MODULE - Passenger side - R.R. - 5010C14 top outlet (one) on fascia - r+rFit the compartment as described in the
procedure: - 7040A18 glove compartment on facia - arrange - 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger
'AIR BAG - R.R. - 7040A37 fuse box cover - r r - 7040A28 TRIM on gearbox control panel - R.R. - 5560B10 analogue control panel - r+r - 7040A23 frame of instrument panel on facia - r r - 5550A10 stalk unit assembly - r+r - 7040A26 steering column trim - r+r - 4110A10 steering wheel - r+r for replacement or checks - 5580C18 air bag module - r+r - 0010T84 coolant for air conditioning system dehydrate and
recharge - 0010T21 coolant check density and top up if necessaryConnect the battery terminals.Check the operation of the Air Bag system
using the Examiner or other diagnostic equipment.