1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, REMOVE AND RE-BUILD - Fiat - PANDA - eLearn

) 1. Undo the fixing bolts (1a) and remove the engine flywheel shield (1b).

1. Open the protective cover.2. Undo the fixing nut (2a) and disconnect the starter motor electrical wiring (2b).

	Name	Connector
2b	Starter' motor	A20A

	Name	Connector
2b	Starter' motor	A20B

	Name	Connector
2b	Starter' motor	A20C

3. Disconnect the electrical connection for the speedometer sensor.

	Name	Connector
3	Speedometer sensor	K84

4. Undo the fixing bolts (4a) for the starter motor (4b) and remove it.

1. Undo the fixing nut (1a) and the fixing bolts (1b) and remove the gearbox (1c).

) Fit the gearbox in position in the engine and tighten the fixing bolts and the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	MANUAL GEARBOX	M12 x 1.25	8

	Fastening	Component	Ø	Value(daNm)
-	Nut	MANUAL GEARBOX	M12 x 1.25	8

Fit the starter motor in place and tighten the fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR ASSEMBLY	M8	2.7

Connect the electrical connection of the speedometer sensor.

	Name	Connector
-	Speedometer sensor	K84

Connect the starter motor wiring.

	Name	Connector
-	Starter' motor	A20A

	Name	Connector
-	Starter' motor	A20B

	Name	Connector
-	Starter' motor	A20C

Close the starter motor wiring protective cover.Fit the engine flywheel guard and tighten the fixing bolts.