2752416 - 1016A20 single cam cover - r + r and replace gasket

Removing ( Refitting )  - 1048A10  air cleaner filtering element - replace - 5510C30  engine timing sensor - r+r1. Disconnect the accelerator cable (1a) from throttle valve linkage (1b) and remove the cable from support bracket (1c).Place the accelerator cable to one side.
1. Undo retaining clip (1a) and disconnect wiring duct (1b) from slots (1c) on the cam cover.
1. Disconnect the oil vapour recovery pipe on the cam cover side and place to one side.
1. Remove the engine oil filler plug.
1. Undo the bolts (1a) and remove the cam cover (1b).
Remove the underlying gasket . Refitting ( Removing ) Fit a new gasket.Fit the cam cover and tighten the bolts to torque.

FasteningComponentØValue(daNm)
-BoltCAM COVERM6 x 11
Fit the engine oil filler plug.Connect the engine oil vapour recovery pipe.Position the electrical wiring duct in the slots on the cam cover.Position the accelerator pedal cable and fit the head to the throttle linkage. - 5510C30  engine timing sensor - r+r - 1048A10  air cleaner filtering element - replace