2752494 - 1056B60 single fuel manifold pipe, with injectors - r + r

Removing ( Refitting ) Disconnect the battery negative terminal. - 1048A10  air cleaner filtering element - replace1. Release the accelerator cable (1b), working on the throttle valve (1a).2. Disconnect the accelerator cable from the mounting bracket. 1. Remove the protective cap (1a) for the breather valve on the single fuel pipe (1b) and discharge the fuel pressure using the tool (1c). Collect the fuel in a suitable container.

	Name	Country
1c	Rapid connector	1.870.684.000

1. Disconnect the electrical connections from the injectors.

	Name	Connector
1	Injector	N70A

	Name	Connector
1	Injector	N70B

	Name	Connector
1	Injector	N70C

	Name	Connector
1	Injector	N70D

2. Disconnect the electrical connections for the spark plugs.3. Disconnect the rapid attachment for the fuel supply pipe.4. Move the wiring away from the work area. 1. Undo the retaining bolts.2. Remove the single fuel manifold pipe complete with injectors. Refitting ( Removing ) Fit the single fuel manfiold pipe in place complete with injectors and tighten the fixing bolts.Place the engine wiring in position on the tappet cover.Connect the rapid attachment for the fuel supply pipe.Connect the electrical connections for the spark plugs.Connect the electrical connections to the injectors.

	Name	Connector
-	Injector	N70A

	Name	Connector
-	Injector	N70B

	Name	Connector
-	Injector	N70C

	Name	Connector
-	Injector	N70D

Fit the accelerator cable in its housing. - 1048A10  air cleaner filtering element - replaceConnect the battery negative terminal.