2752507 - 1072C16 exhaust manifold with catalytic converter - r r

Removing ( Refitting )  - 1048A10  air cleaner filtering element - replace - 1072C44  exhaust manifold heat shield on bulkhead - r+r - 1076B20  rear exhaust silencer - r + r - 1076B40  CENTRE exhaust PIPE - R.R.1. Undo the fixing nuts (1a), disconnect the electrical connections (1b) for the Lambda sensors and remove the exhaust manifold (1c).

	Name	Connector
1b	Lambda sensor on catalyzer	K17

	Name	Connector
1b	Lambda sensor on catalyzer -2	K18

Remove the gaskets underneath. Refitting ( Removing ) Fit new gaskets.Fit the exhaust manifold in place on the single cylinder head and tighten the fixing nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST MANIFOLD/S	M8 x 1.25	2.5

Connect the Lambda probe electrical connections.

	Name	Connector
-	Lambda sensor on catalyzer	K17

	Name	Connector
-	Lambda sensor on catalyzer -2	K18

 - 1076B40  CENTRE exhaust PIPE - R.R. - 1076B20  rear exhaust silencer - r + r - 1072C44  exhaust manifold heat shield on bulkhead - r+r - 1048A10  air cleaner filtering element - replace