2752839 - 4450D10 hub of one rear wheel, l/h or r/h - r+r with wheel removed

Removing ( Refitting ) Place the car on a ramp. - 4450D70  hub cap of one rear wheel, l/h or r/h - r+r1. Undo the fixing pins.2. Remove the rear brake drum. 1. Undo the rear wheel hub nut.2. Remove the rear wheel hub (2a) complete with spacers (2b).

The rear hub bearing should not be dismantled from the hub. If it proves necessary on account of noise or excessive clearance, replace the rear hub complete with bearing.

Refitting ( Removing ) Fit the rear wheel hub complete with spacers.Tighten the rear wheel hub nut to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	REAR WHEEL HUB WITH BEARINGS	M22 x 1.5	28

Fit the rear brake drum and tighten the retaining pins.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR BRAKE DRUM	M12	1.2

 - 4450D70  hub cap of one rear wheel, l/h or r/h - r+rRemove the vehicle from the ramp.