5505C27 INTEGRATED ENGINE COMPARTMENT WIRING - R.R. WITH FOULING COMPONENTS REMOVED - Fiat - PANDA - eLearn

2752938 - 5505C27 Integrated ENGINE COMPARTMENT WIRING - R.R. with fouling components removed

) 1. Remove the cable pass on the right side of the vehicle from its seating and open the cover.2. Remove the adhesive tape (2a) present on the wiring (2b) and release the windscreen/rear window washer tubes (2c).Release the wiring from the cable pass.Following the same procedure, release the wiring from the cable pass on the left of the vehicle.

1. Undo the retaining bolts.2. Remove the cable pass cover.

1. Disconnect electrical connections (1a), (1b), (1c), (1d), (1e), (1f), (1g), (1h), (1i), (1l), (1m), (1n) and (1o).

	Name	Connector
1a	Right front wheel sensor for ABS	K71

	Name	Connector
1b	Right headlamp	F11

	Name	Connector
1c	Low-tone horn	P11

	Name	Connector
1d	Windscreen/rear window pump motor	N22

	Name	Connector
1e	Right fog lamp	F16

	Name	Connector
1f	Lambda sensor on catalyzer -2	K18

	Name	Connector
1g	Engine electric fan motor	N11

	Name	Connector
1h	Reversing lights switch	I20

	Name	Connector
1i	Left fog lamp	F15

	Name	Connector
1l	Left headlamp	F10

	Name	Connector
1m	Lambda sensor on catalyzer	K17

	Name	Connector
1n	Fan earth	C45

	Name	Connector
1o	Right front earth	C11

	Name	Connector
1p	Engine management control unit	M10B

1. Disconnect electrical connections (1a), (1b), (1c), (1d), (1e), (1f), (1g), (1h), (1i), (1l), (1m) and (1n).

	Name	Connector
1a	Front dashboard coupling	D1

	Name	Connector
1b	Air conditioning earth	C16

	Name	Connector
1c	Front / air conditioning - heater coupling	D8

	Name	Connector
1d	Brake fluid level sensor (switch)	K25

	Name	Connector
1e	Windscreen wiper motor	N15

	Name	Connector
1f	ABS control unit	M50

	Name	Connector
1g	ABS front earth	C12

	Name	Connector
1h	Front rear coupling	D6

	Name	Connector
1i	Brake pedal switch	I30

	Name	Connector
1l	Body computer	M1A

	Name	Connector
1l	Body computer	M1B

	Name	Connector
1l	Body computer	M1C

	Name	Connector
1l	Body computer	M1D

	Name	Connector
1m	Front / engine coupling	D4

	Name	Connector
1n	Left front sensor. for ABS	K70

1. Disconnect electrical connections (1a) and (1b).

	Name	Connector
1a	Right rear wheel sensor for ABS	K76

	Name	Connector
1b	Left rear wheel sensor for ABS	K75

1. Working in the interior compartment, remove the cable pass from its seating by pushing from inside the windscreen wiper compartment.

Release the wiring from the fastenings.Working from inside the engine compartment, remove the wiring complete with additional junction unit.

Refitting ( Removing

) Position the wiring in its seating.Working from in the interior compartment, fit the cable pass in its seating.Connect the electrical connections.

	Name	Connector
-	Right rear wheel sensor for ABS	K76

	Name	Connector
-	Left rear wheel sensor for ABS	K75

	Name	Connector
-	Front dashboard coupling	D1

	Name	Connector
-	Air conditioning earth	C16

	Name	Connector
-	Front / air conditioning - heater coupling	D8

	Name	Connector
-	Brake fluid level sensor (switch)	K25

	Name	Connector
-	Windscreen wiper motor	N15

	Name	Connector
-	ABS control unit	M50

	Name	Connector
-	ABS front earth	C12

	Name	Connector
-	Front rear coupling	D6

	Name	Connector
-	Brake pedal switch	I30

	Name	Connector
-	Body computer	M1A

	Name	Connector
-	Body computer	M1B

	Name	Connector
-	Body computer	M1C

	Name	Connector
-	Body computer	M1D

	Name	Connector
-	Front / engine coupling	D4

	Name	Connector
-	Left front sensor. for ABS	K70

	Name	Connector
-	Right front wheel sensor for ABS	K71

	Name	Connector
-	Right headlamp	F11

	Name	Connector
-	Low-tone horn	P11

	Name	Connector
-	Windscreen/rear window pump motor	N22

	Name	Connector
-	Right fog lamp	F16

	Name	Connector
-	Lambda sensor on catalyzer -2	K18

	Name	Connector
-	Engine electric fan motor	N11

	Name	Connector
-	Reversing lights switch	I20

	Name	Connector
-	Left fog lamp	F15

	Name	Connector
-	Left headlamp	F10

	Name	Connector
-	Lambda sensor on catalyzer	K17

	Name	Connector
-	Fan earth	C45

	Name	Connector
-	Right front earth	C11

	Name	Connector
-	Engine management control unit	M10B

Fit the cable pass cover and tighten the fixing bolts.Position the wiring in the cable pass on the right side of the vehicle.Secure the windscreen/rear window washer tubes to the wiring using suitable adhesive tape.Close the cable pass cover and position it in its seating.Following the same procedure, secure the wiring to the cable pass located on the left side of the vehicle.Restore the wiring fixings.