2753216 - 7040L10 cabin floor carpet - r r

Before working on the airbag system, the following preliminary operations must be carried out: (1) turn the ignition key to the OFF position and extract it; (2) disconnect the battery terminals and insulate them; (3) wait for at least 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM)

Removing ( Refitting )  - 5580C18  air bag module - r+r

Before removing the steering wheel, position the wheels as parallel as possible to the longitudinal axis of the vehicle.

 - 4110A10  steering wheel - r+r for replacement or checks - 7040A26  steering column trim - r+r - 5550A10  stalk unit assembly - r+r - 7040A23  frame of instrument panel on facia - r r - 5560B10  analogue control panel - r+r - 7040A28  TRIM on gearbox control panel - R.R. - 7040A37  fuse box cover - r r - 5580C26  LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R.Remove the compartment as described in the procedure: - 7040A18  glove compartment on facia - arrange - 5010C14  top outlet (one) on fascia - r+r (Both)  - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 7040A78  radio compartment box r r - 7040A72  UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R . - 7040A56  switch panel/support(push buttons)-r r - 5020B22  heater control support control (one) - arrange (All)  - 7040A17  air conditioner controls (Both)  - 7040A10  instrument facia trim - r+r - 7040L42  sill plate connection of one front door (1), lh or rh - r r (Both)  - 7210E36  R.R. FRONT SIDE DOOR (Both) Remove the dashboard supporting crossmember complete with heater/air conditioning and dashboard wiring as described in the procedure: - 7040A98  instrument facia trim support beam - r r with facia removed (Both)  - 7040H36  central trim lower element - r r - 7045A13  front seat with side bag r r (Both)  - 7040L20  tunnel trim - r r - 7040B10  load platform (luggage platform) trim - r+r - 7050A20  one-piece rear seat cushion - r r - 7040H50  rear panel - r r (Both)  - 7050A19  rear seat squab - r r1. Undo the accelerator pedal travel regulator and remove it.2. Removing the buttons fixing the passenger compartment floor carpet to the bulkhead using the special tool.

	Name	Country
-	Scraper blade	1.878.077.000

1. Remove the passenger compartment floor carpet releasing it from the steering column, the gear selector and engagement control lever and mounting and the handbrake lever.

Take great care when removing the passenger compartment floor carpet not to damage the electrical wiring.

Refitting ( Removing ) Check the condition of the passenger compartment floor carpet and replace it if necessary.Fit the passenger compartment floor carpet in place and secure it to the bulkhead using the special fixing buttons. Tighten the accelerator pedal travel regulator. - 7050A19  rear seat squab - r r - 7040H50  rear panel - r r (Both)  - 7050A20  one-piece rear seat cushion - r r - 7040B10  load platform (luggage platform) trim - r+r - 7040L20  tunnel trim - r r - 7045A13  front seat with side bag r r (Both)  - 7040H36  central trim lower element - r r (Both) Fit the dashboard supporting crossmember complete with heater/air conditioning and dashboard wiring as described in the procedure: - 7040A98  instrument facia trim support beam - r r with facia removed - 7210E36  R.R. FRONT SIDE DOOR (Both)  - 7040L42  sill plate connection of one front door (1), lh or rh - r r (Both)  - 7040A10  instrument facia trim - r+r - 7040A17  air conditioner controls (Both)  - 5020B22  heater control support control (one) - arrange (All)  - 7040A56  switch panel/support(push buttons)-r r - 7040A72  UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R . - 7040A78  radio compartment box r r - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 5010C14  top outlet (one) on fascia - r+r (Both) Fit the compartment as described in the procedure: - 7040A18  glove compartment on facia - arrange - 5580C26  LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R. - 7040A37  fuse box cover - r r - 7040A28  TRIM on gearbox control panel - R.R. - 5560B10  analogue control panel - r+r - 7040A23  frame of instrument panel on facia - r r - 5550A10  stalk unit assembly - r+r - 7040A26  steering column trim - r+r - 4110A10  steering wheel - r+r for replacement or checks - 5580C18  air bag module - r+rIf the vehicle is equipped with air conditioning, carry out the following procedure: - 0010T84  coolant for air conditioning system dehydrate and recharge - 0010T21  coolant check density and top up if necessaryConnect the battery terminals.Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.