2753258 - 7045D31 Front seat BACKREST COVER, left or right - R.R. with seat removed
Refitting
(
Removing
)
Check that the cover is intact
and that there are no signs of wear or cuts.Fit the trim to the padding.1. Using special pliers, attach the new clips located in the front
centre section in the area where the cover and the upholstery are
joined.
Name
Country
-
Pliers for metal points
1.878.017.001
Fit the cover complete with
upholstery on the seat backrest.Place the cover under the two fixed head
restraint guide bushes and adjust the fabric so that there are no creases.Fit the fixed head restraint pushing it
downwards until it is in contact with the guide bushes.Check that the head restraint does not
slip out of the housing.Lower the cover complete with upholstery.
Refitting
(
Removing
)
Check that the cover is intact
and that there are no signs of wear or cuts.Fit the trim to the padding.1. Using special pliers, attach the new clips located in the front
centre section in the area where the cover and the upholstery are
joined.
