Dismantling
(
Reassembling
)
1. Remove the gudgeon pin circlips.2. Withdraw the pin (2a) using a hydraulic press, the support (2b)
and a suitable puller (2c).
Name
Country
2b
Support
1.895.615.000
3. Separate the piston (3a) from the connecting rod (3b).
Reassembling
(
Dismantling
)
Heat the connecting rods in an oven to
a temperature of around 240 ° C to allow the fitting of the gudgeon pin. 1. Join the connecting rods to the pistons so that the gudgeon pin
offset is facing the number stamped on the big end.
1. Fit the gudgeon pin (1a) working in a vice and using the fitting
tool (1b).
Dismantling
(
Reassembling
)
1. Remove the gudgeon pin circlips.2. Withdraw the pin (2a) using a hydraulic press, the support (2b)
and a suitable puller (2c).
