1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL - Fiat - PANDA - eLearn

2752504 - 1072B10 inlet manifold - r + r and replace seal

) - 1048A10 air cleaner filtering element - replace - 1056B50 coolant temperature sensor - r + r - 1056B14 throttle case - r + r1. Disconnect the electrical connection for the air temperature sensor.

	Name	Connector
1	Integrated air temperature sensor	K43

2. Disconnect the electrical connection from the fuel vapour recovery solenoid.

	Name	Connector
2	Fuel vapour recovery solenoid	L10

3. Disconnect the rapid attachment coupling for the fuel vapour recover pipe.4. Open the fastening band (4a) and disconnect the single-acting valve pipe (4b).5. Undo the fixing nuts (5a) and remove the intake manifold (5b).

Refitting ( Removing

) Fit the intake manifold in place and tighten the fixing nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	INLET MANIFOLD	M8 x 1.25	2.7

Connect the electrical connection for the air temperature sensor.

	Name	Connector
-	Integrated air temperature sensor	K43

Connect the electrical connection from the fuel vapour recovery solenoid.

	Name	Connector
-	Fuel vapour recovery solenoid	L10

Connect the pipe for the single-acting valve and renew the fastening band.Connect the rapid attachment for the fuel vapour recovery pipe. - 1056B14 throttle case - r + r - 1056B50 coolant temperature sensor - r + r - 1048A10 air cleaner filtering element - replace