Z79 CAN BUS ERROR - Fiat - PANDA - eLearn

169000609 - Z79 CAN BUS ERROR

The diagnostic equipment signals the following error: "U1601 - CAN error"

This error is signalled if there is an open circuit (power supply or earth) in the CAN lines

1	CAN CHECK	All OK	Problems encountered	Operation
	Check the CAN network impedence is correct See Test 5505OA CAN LINE C CHECK	Move on to Step 3 1	ABS control unit side resistance non compliant CAN electrical connections faulty	Replace ABS control unit Op. 3340A20 ABS ELECTRONIC CONTROL UNIT - R+R Restore correct connection and move on to Step 3
3	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Clear the errors using the ExaminerCarry out a road test See Test 3340OA A.B.S. SYSTEM ACTUATION CHECKto ensure that the control unit checks whether there are any errors still present.Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis	The fault persists	Move on to Step 1

CAN CHECK

All OK

Problems encountered

Operation

Check the CAN network impedence is correct See Test 5505OA CAN LINE C CHECK

Move on to Step 3 1

ABS control unit side resistance non compliant
CAN electrical connections faulty

Replace ABS control unit Op. 3340A20 ABS ELECTRONIC CONTROL UNIT - R+R
Restore correct connection and move on to Step 3

CHECK ON CORRECT OPERATION

All OK

Problems encountered

Operation

Clear the errors using the ExaminerCarry out a road test See Test 3340OA A.B.S. SYSTEM ACTUATION CHECKto ensure that the control unit checks whether there are any errors still present.Return to the workshop and check that the fault is no longer present using the diagnostic equipment

End of diagnosis

The fault persists

Move on to Step 1