169001544 - 2110E12 REAR DRIVE TRANSFER CASE - R.R. WITH THE GEARBOX DETACHED

Removing ( Refitting ) 1. Position the gearbox-rear drive idler casing (1a) on the special support stand (1b) securing it to the mounting bracket (1c).
DescriptionCodeFunction
1bStand1.871.001.014Gearbox support
DescriptionCodeFunction
1cBracket1.871.001.000Gearbox support
1. Prise up and remove the two differential side joints.
1. Undo the fixing bolts (1a) and remove the oil seal cover (1b).
1. Undo the fixing bolts (1a) and remove the rear drive idler casing (1b).Remove the remaining oil seal for the differential joint.
Refitting ( Removing ) Renew the bead of sealant on the gearbox casing in the housing for the rear drive idler casing.
DescriptionQty.ComponentTypeClassification
-Loctite--510Sealant
Place the rear drive idler casing in position and tighten the fixing bolts to torque.
Value daNmFasteningComponentØ  
-7Bolt--
1. Fit a new left side oil seal (1a) using the special fitting tool (1b).
DescriptionCodeFunction
1bFitting tool1.871.005.900Fitting oil seal
Renew the thread-locking agent on the bolts fixing the oil seal cover.2. Tighten the bolts fixing the cover to torque.
Value daNmFasteningComponentØ  
22.5Bolt--
3. Fit the right side oil seal using the special fitting tool.
DescriptionCodeFunction
3Fitting tool1.871.005.900Fitting oil seal
Fit the two differential joints in place.Remove the gearbox-rear drive idler casing assembly from the support stand releasing it from the mounting bracket.
DescriptionCodeFunction
-Stand1.871.001.014Gearbox support
DescriptionCodeFunction
-Bracket1.871.001.000Gearbox support