2750999 - C06 MANUAL-AUTOMATIC SHIFT
The vehicle switches to automatic by itself when driving in manual| Results of the tests | ||||
| 0 | CONTROL UNIT ERRORS CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that there are no control unit errors. In particular:
| Continue to Step 3 | Presence of error indicated | Continue to Step 1 | |
| 1 | CHECKS ON FAULTS DETECTED | All OK | Problems met | Operation |
| Check the faults according to the See Test 2127I What to do for error in Selespeed control unit | End of diagnosis | The state displayed is not correct (Lever switch error - Lever check) | Check the connections, continuity of the wiring and the gear leverContinue to Step 2 | |
| There is no change of state and/or the word 'ECO' is not displayed (Lever switch error - check ECO button) | Check the button and wiringContinue to Step 2 | |||
| 2 | AFTER THE CHECKS ON THE FAULTS DETECTED | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 3 | |
| 3 | GEAR LEVER CHECK | All OK | Problems met | Operation |
| Check that the gear lever is working properly following See Test 2127L GEAR LEVER CHECK | Continue to Step 4 | The lever states displayed are not correct | Check the wiring and the switches/gear lever Repair/replace the part that is not working | |
| There is no change of state and/or the 'AUTO' button is not displayed | Check the switch and the wiring. Repair/replace the part that is not working | |||
| 4 | AFTER THE CHECK ON THE CORRECT OPERATION OF THE GEAR LEVER | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Contact Technical Service for further information on the problem | |