2751071 - K05 MILOMETER NOT WORKING

The milometer either does not work or does not work properly whilst driving. the speedometer works properly. If the speedometer is also not working correctly, see  See table K03  SPEEDOMETER NOT WORKING
the milometer signal is supplied by the Body Computer Node using the signals coming from the Brake Node.
Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation
Check that no failure message is displayed with the engine started upContinue to Step 2There are faults detectedContinue to Step 1
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the diagnostic equipment (Examiner) to the Body Computer.

Check the following on the CAN information network:

  • for inactive control units;
  • control unit errors;
  • absence of control unit with error in CAN line
Continue to Step 2Presence of faults in the CAN networkContinue following the instructions for the diagnostic equipment
Presence of errors at instrument panel nodeContinue to Step 2
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the diagnostic equipment (Examiner) to the diagnostic socket or keep it connected and check that there are no faults at the instrument panel nodeContinue to Step 3Presence of errors or failed dialogue with the diagnostic equipmentContinue following the instructions for the diagnostic equipment
3CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keep the diagnostic equipment (Examiner) connected to the diagnostic socket and check the operation of the display by means of active diagnosisContinue to Step 4Milometer not workingReplace instrument panel Op. 5560B11
4Continue as instructed by the testerAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis.