2751073 - K08 DISPLAY DOES NOT SHOW OUTSIDE TEMPERATURE
With the ignition ON, the reconfigurable matrix does not display the outside temperature; | the temperature information is supplied directly to the instrument panel node by the sensor on the driver's door mirror |
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that with the ignition switched ON:
| Continue to Step 2 | Display shows information described | Restore the standard screen on the matrix that can be reconfigured | |
| There are dashes in place of the temperature. | Continue to Step 1 | |||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the diagnostic equipment (Examiner or other instruments) and check the CAN network information:
| Continue to Step 2 | Presence of faults in the CAN network | Continue following the instructions for the diagnostic equipment | |
| Presence of errors at instrument panel node | Continue to Step 2 | |||
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keep the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check that there are no faults at the instrument panel node | Continue to Step 3 | Presence of errors or failed dialogue with the diagnostic equipment | Continue following the instructions for the diagnostic equipment | |
| 3 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check the operation of the reconfigurable matrix through active diagnosis. | Continue to Step 4 | Display that can be reconfigured not working | Replace instrument panel Op. 5560B11 | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | . | ||