2751080 - K19 FUEL GAUGE NOT WORKING
The instant consumption reading message is supplied by the Engine Management Control Unit Node which sends it via the C-CAN; the Body Computer Node via the B-CAN to the Instrument Panel Node.| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect an Examiner to the tester input and check the brake node for the following in error modes: | Continue to Step 2 | The indicator does not move | Replace instrument panel Op. 5560B11 | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the Examiner diagnostic equipment to the diagnostic connector and check the following through the CAN information:
| Continue to Step 3 | Presence of faults | Continue following the instructions for the diagnostic equipment | |
| 3 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the engine control unit Op. 1056B82 | |