| | Results of the tests |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the Examiner diagnostic equipment to the diagnostic connector and
check that there are no faults in the errors ambient at the headlamp alignment
correction control unit | Continue to Step 3 | Presence of faults | Continue as instructed by
the tester |
| Warning light faulty | Continue to Step 2 |
| 2 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
|---|
| Check
the electrical connection (continuity/insulation to earth) between
the Headlamp Alignment Correction Control Unit and the Instrument
Panel Node See E4010 INSTRUMENT PANEL | Continue to Step 3 | Cable directly earthed/broken
| Renew
the electrical connections See E4010 INSTRUMENT PANEL |
| 3 | Continue as instructed by
the tester | All
OK | Problems
met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Replace the instrument panel Op. 5560B11 |
