2751114 - M05 MANUAL FRONT WINDOWS NOT WORKING

If an obstacle is detected between the glass and the upper safety casing whilst the window is closing, it does not stop immediately or change direction.
The change of direction if an obstacle is detected lasts for around 300 ms.
Results of the tests
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that there are no erros in the Door Node control unit involvedContinue to Step 2Presence of errors in the door node involvedContinue according to the instructions for the diagnostic equipment
2CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check the condition of the connection between the door node control unit involved and the safety sensor outer casing See   E3050  ELECTRIC FRONT WINDOWS Continue to Step 3Connections brokenRestore the connections See   E3050  ELECTRIC FRONT WINDOWS
3Continue as instructed by the testerAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsReplace the safety sensor casing Op.   7005D18