1056B50 COOLANT TEMPERATURE SENSOR - R + R - Fiat - PANDA - eLearn

2752492 - 1056B50 coolant temperature sensor - r + r

) Disconnect the battery negative terminal. - 1048A10 air cleaner filtering element - replace1. Open the fastening clips and release the wiring.2. Undo the fixing nuts (2a) and remove the wiring mounting bracket (2b).

1. Disconnect the electrical connection for the engine coolant temperature sensor.

	Name	Connector
1	Engine coolant temperature sensor/sender unit	K36

2. Open the fastening band (2a) and disconnect the coolant pipe (2b).3. Undo the fixing nuts (3a) and remove the engine coolant temperature sensor (3b).

Refitting ( Removing

) Fit the sensor in place and tighten the fixing nuts.Connect the engine coolant pipe and close the fastening band.Connect the electrical connection for the engine coolant temperature sensor.

	Name	Connector
-	Engine coolant temperature sensor/sender unit	K36

Fit the wiring mounting bracket in place and tighten the fixing nuts. - 1048A10 air cleaner filtering element - replace - 0010T21 coolant check density and top up if necessaryConnect the battery negative terminal.