2752655 - 1820A26 thrust bearing linkage - r + r with gearbox removed
Removing ( Refitting ) - 1820A30 thrust bearing - r + r with gearbox removed1. Open and remove the circlip (1a) and remove the thrust bearing control lever (1b).
1. Release and remove the fork shaft and keep the upper and lower
bushes.
Refitting
(
Removing
)
Check the condition of the
removed components.Replace the bushes, if there is too much
play on the fork shaft.Refit the fork control shaft.Position the thrust bearing control lever
and secure it to the fork shaft using the special circlip. - 1820A30 thrust bearing - r + r with gearbox removed