2752667 - 2125C22 gear lever and mount - r r
Removing
(
Refitting
)
- 7040A28 TRIM on gearbox control panel - R.R.1. Disconnect the gear selector and engagement rod ends.2. Remove the retaining clips for the gear selector and engagement
rods.3. Undo the fixing bolt (3a) and the nuts (3b).4. Release the gear selector and engagement rods and remove the
gearbox control support and lever.
Refitting
(
Removing
)
Positino the gear selector and engagement
rods and the gearbox control support and lever.Tighten the fixing bolt and nuts to the
recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | GEAR LEVER MOUNT | M8 | 1.5 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | GEAR LEVER MOUNT | M8 | 1.5 |