2752702 - 2710A52 differential end sliding joint (one) l/h or r/h - r + r with drive shaft removed - includes boot replacement
Removing
(
Refitting
)
Position the driveshaft in
a vice.1. Remove the sliding joint circlip.2. Release the sliding joint (2a) from the driveshaft (2b).
Refitting
(
Removing
)
Position the sliding joint
boot band on the driveshaft.Fit the sliding joint boot on the driveshaft.Fit the sliding joint on the driveshaft.Fit the sliding joint circlip.Position the sliding joint boot correctly
and tighten the band.Fill the sliding joint boot with grease. | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Grease (g) | DIFF END CONSTANT VELOCITY JOINT | TUTELA MRM ZERO | 100 |