2752752 - 3330E69 RIGID PIPE (one), left or right, to the rear wheel cylinders - R.R.
Removing
(
Refitting
)
Place the car on a lift.Remove the protective cap on the brake
caliper bleed valve.Connect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake
fluid reservoir is emptyRaise the lift.1. Undo the connector on the rigid pipe to the rear cylinders with
the intermediate flexible section.
1. Undo connector (1a) on the rigid pipe to the rear brake cylinders
(1a), release from the retaining clips (1c) on the rear axle and
then remove.
Refitting
(
Removing
)
Fit the rigid pipe to the rear
brake cylinders.Tighten the connector on the rigid pipe
to the rear brake cylinder to torque.
Fastening
Component
Ø
Value(daNm)
-
Connector
BRAKING SYSTEM FITTING/S
M10
1.6
Attach the pipe to the retaining clips
on the rear axle.Tighten the rigid pipe connector to the
intermediate hose to torque.
Removing
(
Refitting
)
Place the car on a lift.Remove the protective cap on the brake
caliper bleed valve.Connect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake
fluid reservoir is emptyRaise the lift.1. Undo the connector on the rigid pipe to the rear cylinders with
the intermediate flexible section.
