2752766 - 3340B62 rear connection central pipe - r r

Removing ( Refitting ) Place the car on a ramp. - 3330C34  brake fluid reservoir - r + r and wash inside - versions with r/h drive and abs - 5530B10  battery - r+r - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 1048A10  air cleaner filtering element - replace - 3330C14  (PUMP) - MASTER CYLINDER .R.R for versions with A.B.S. - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R.Raise the lift.1. Open the brake pipe retaining clip 1. Undo bolts (1a) and remove retaining clip (1b).2. Remove the front section of the rigid brake pipe and fuel pipe protection 1. Undo the connector on the rigid pipe from the master cylinder, lower the lift and remove it from the upper part of the engine compartment. Refitting ( Removing ) Fit the rigid pipe from ABS hydraulic control unit to connection.Tighten the rear brake pipe intermediate rigid section connection to torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	BRAKING SYSTEM FITTING/S	M10	1.6

Fit the front section of the rigid brake pipe and fuel pipe protection and tighten the bolts and front side clip.Secure the two rigid pipes from the ABS control unit to the connectors, in the lower body fastening clip. - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. - 3330C14  (PUMP) - MASTER CYLINDER .R.R for versions with A.B.S. - 1048A10  air cleaner filtering element - replace - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 5530B10  battery - r+r - 3330C34  brake fluid reservoir - r + r and wash inside - versions with r/h drive and abs - 0010T64  brake and or clutch fluid check level and top up as necessary - 0010T65  hydraulic brake system bleed air