2752772 - 3380A10 handbrake lever - r+r

Removing ( Refitting ) Disconnect the battery negative terminal. - 7040L20  tunnel trim - r r1. Undo the adjustment nut (1a) after slackening the cable tension, then disconnect the cables (1b) from the mounting.2. Disconnect the electrical connection for the handbrake.

	Name	Connector
2	Handbrake "on" switch	I40

3. Undo the bolts securing the lever to the floor.4. Remove the handbrake lever. Refitting ( Removing ) Positin the handbrake lever in the special housing and tighten the fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	HANDBRAKE LEVER	M8	2.7

Connect the electrical connection for the handbrake.

	Name	Connector
-	Handbrake "on" switch	I40

Position the cables in the mount and tighten the adjustment nut to put them under slight tension. - 3380A04  handbrake - check travel - 7040L20  tunnel trim - r rConnect the battery negative terminal.