2752781 - 4110A46 INTERMEDIATE SHAFT CONNECTED TO STEERING BOX - R.R.

Removing ( Refitting ) Disconnect the battery negative terminal. - 5580C18  air bag module - r+r

Before working on the Air Bag system, follow the safety instructions for working on the system very carefully (See 5580C - Air Bag System - Precautions).

Before removing the steering wheel, position the wheels as parallel as possible to the vehicle longitudinal axle.

 - 4110A10  steering wheel - r+r for replacement or checks - 7040A26  steering column trim - r+r - 5550A10  stalk unit assembly - r+r - 4110D20  steering electrical control device - r r . 1. Undo the bolt (1a) and remove the intermediate shaft connected to the steering box (1b). Refitting ( Removing ) Place the intermediate shaft connected to the steering box and secure it by tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	INTERMEDIATE SHAFT CONNECTED TO STEERING BOX.	-	2.8

 - 4110D20  steering electrical control device - r r .  - 5550A10  stalk unit assembly - r+r - 7040A26  steering column trim - r+r - 4110A10  steering wheel - r+r for replacement or checks - 5580C18  air bag module - r+rConnect the battery terminals.Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.Connect the battery negative terminal.