2752840 - 4450D14 hub axle pillar of one rear wheel, l/h or r/h - r+r with hub removed - includes bush replacement if necessary
Removing
(
Refitting
)
1. Undo the connector and disconnect the rear brake rigid pipe on
the cylinder.2. Undo the retaining bolts.3. Remove the rear drum brake assembly.
1. Unscrew the retaining nuts.2. Remove the stub axle for the rear wheel hub from the rear suspension.
Refitting
(
Removing
)
Fit the stub axle for the suspension
wheel hub.Tighten the retaining nuts to torque.
Fastening
Component
Ø
Value(daNm)
-
Nut
REAR KNUCKLE
M10 x 1.25
6.7
Connect the rear brake rigid pipe to the
cylinder and tighten the connector to torque.
Fastening
Component
Ø
Value(daNm)
-
Connector
BRAKING SYSTEM FITTING/S
M10
1.6
Fit the rear brake assembly and tighten
the reataining bolts.
Removing
(
Refitting
)
1. Undo the connector and disconnect the rear brake rigid pipe on
the cylinder.2. Undo the retaining bolts.3. Remove the rear drum brake assembly.
