2752868 - 5020A44 heater fan motor resistor - r+r

Before working on the Air Bag system, the following preliminary operations must be carried out: (1) turn the ignition OFF and extract the key; (2) disconnect the battery terminals and insulate them; (3) wait for at least 10 minutes before proceeding.

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM)

Removing ( Refitting )  - 5580C18  air bag module - r+r

Before removing the steering wheel, position the wheels as parallel as possible to the longitudinal axis of the vehicle.

 - 4110A10  steering wheel - r+r for replacement or checks - 7040A26  steering column trim - r+r - 5550A10  stalk unit assembly - r+r - 7040A23  frame of instrument panel on facia - r r - 5560B10  analogue control panel - r+r - 7040A28  TRIM on gearbox control panel - R.R. - 7040A37  fuse box cover - r r - 5580C26  LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R.Remove the compartment as described in the procedure: - 7040A18  glove compartment on facia - arrange - 5010C14  top outlet (one) on fascia - r+r - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 7040A78  radio compartment box r r - 7040A72  UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R . - 7040A56  switch panel/support(push buttons)-r r - 5020B22  heater control support control (one) - arrange - 7040A17  air conditioner controls - 7040A10  instrument facia trim - r+r - 7040L42  sill plate connection of one front door (1), lh or rh - r r - 7210E36  R.R. FRONT SIDE DOORFit the compartment as described in the procedure: - 7040A98  instrument facia trim support beam - r r with facia removed1. Disconnect the electrical connection.

	Name	Connector
1	Air fan adjustment resistance	O30

2. Undo retaining bolts3. Remove the resistance. Refitting ( Removing ) Place the resistor in position and tighten the fixing bolt.Connect the electrical connection.

	Name	Connector
-	Air fan adjustment resistance	O30

Position the dashboard crossmember complete with heater/air conditioning as described in the procedure:  - 7040A98  instrument facia trim support beam - r r with facia removed - 7210E36  R.R. FRONT SIDE DOOR - 7040L42  sill plate connection of one front door (1), lh or rh - r r - 7040A10  instrument facia trim - r+r - 7040A17  air conditioner controls - 5020B22  heater control support control (one) - arrange - 7040A56  switch panel/support(push buttons)-r r - 7040A72  UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R . - 7040A78  radio compartment box r r - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 5010C14  top outlet (one) on fascia - r+rFit the compartment as described in the procedure: - 7040A18  glove compartment on facia - arrange - 5580C26  LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R. - 7040A37  fuse box cover - r r - 7040A28  TRIM on gearbox control panel - R.R. - 5560B10  analogue control panel - r+r - 7040A23  frame of instrument panel on facia - r r - 5550A10  stalk unit assembly - r+r - 7040A26  steering column trim - r+r - 4110A10  steering wheel - r+r for replacement or checks - 5580C18  air bag module - r+r - 0010T21  coolant check density and top up if necessaryConnect the battery terminals.Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.