2752906 - 5040D77 air conditioner mixer flap control motor - r r

Removing ( Refitting ) Disconnect the battery negative terminal.1. Release and remove the bottom right trim.
1. Disconnect the electrical connection.

NameConnector
1Air mixture flap actuator N81
2. Undo the retaining bolts.3. Remove the air conditioner air mixer flap motor
Refitting ( Removing ) Fit the air conditioner air mixer flap motor and tighten the fixing bolts.
If the mixer flap motor has to be replaced, the new components must undergo the Proxi initialisation procedure using the diagnostic station (Examiner).
Connect the electrical connection.

NameConnector
-Air mixture flap actuator N81
Fit the bottom right trim and check that it is secure.Connect the battery negative terminal.