Removing
(
Refitting
)
Place the car on a lift.Disconnect the battery negative terminal.Raise the car.1. Undo the retaining bolt.2. Disconnect the electrical connection (2a) and remove the rpm
sensor (2b).
Name
Connector
2a
Rpm sensor
K46
Refitting
(
Removing
)
Fit the rpm sensor in its seating and tighten
the fixing bolt.Connect the electrical connection.
Name
Connector
-
Rpm sensor
K46
Lower the vehicle.Connect the battery negative terminal.Remove the vehicle from the ramp.
Removing
(
Refitting
)
Place the car on a lift.Disconnect the battery negative terminal.Raise the car.1. Undo the retaining bolt.2. Disconnect the electrical connection (2a) and remove the rpm
sensor (2b). 
