5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONER - Fiat - PANDA - eLearn

2752962 - 5530A14 alternator - r+r for versions with air conditioner

) - 1048A10 air cleaner filtering element - replace - 4450B04 right front wheel r r1. Undo the fixing nut (1a) and the fixing bolts (1b) and move the wheel arch liner (1c) aside.

1. Undo the fixing bolts (1a) and remove the timing dust guard (1b).

- 1092B40 air conditioner compressor/alternator drive belt - r + r1. Undo the fixing bolt (1a) and release the exhaust pipe lower fixing bracket (1b).

Right side of car.1. Remove the fastening clilp (1a) and release the brake fluid pipe (1b) from the suspension damper.

Right side of car.1. Unscrew the retaining nut.2. Fit the tool for releasing the steering track rod ends.

	Name	Country
2	Extractor	1.871.000.700

3. Release the steering track rod ends from the wheel hub.4. Undo the fixing bolts (4a) and release the front steering knuckle (4b) from the shock absorber (4c).

Right side of car.Open the bands fastening the coupling boot.Release the driveshaft from the differential side joint. - 1008C32 GEARBOX LOWER REACTION ROD ' -R.R.1. Open the wiring protective cover.2. Undo the fixing nuts (2a) and disconnect the alternator electrical wiring (2b).

	Name	Connector
2b	Starter' motor	A20A

	Name	Connector
2b	Starter' motor	A20B

3. Undo the fixing bolts (3a) and remove the alternator (3b).

Refitting ( Removing

) Fit the alternator in its seating and tighten the fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	AIR CONDITIONER ASSEMBLY COMPRESSOR	M10 x 1.25	5

Connect the alternator wiring and tighten the fixing nuts.

	Name	Connector
-	Starter' motor	A20A

	Name	Connector
-	Starter' motor	A20B

Close the alternator wiring protective cover. - 1008C32 GEARBOX LOWER REACTION ROD ' -R.R.Fit the driveshaft in the different side joint and re-secure the boot with its fixing band.

Replace the grease contained inside the driveshafts and the differential housing.

	Type	Component	Name	Qty.
-	Grease (g)	DIFF END CONSTANT VELOCITY JOINT	TUTELA MRM ZERO	100

Position the front hub steering knuckle in the housing in the shock absorber and tighten the fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT HUB STEERING KNUCKLE.	M10 x 1.25	7.5

Fit the steering track rod end in place and tighten the fixing nut to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	PRESSURE PUMP	M8	2.5

Fit the timing gear dust guard and tighten the fixing bolts.Tighten the wheel arch liner bolts.Secure the brake fluid pipe to the mounting. - 1092B40 air conditioner compressor/alternator drive belt - r + r - 4450B04 right front wheel r r - 1048A10 air cleaner filtering element - replace