2753029 - 7005A10 front side door - adjust striker and adapt seal in necessary

Before altering the position of the door striker, ensure the door is properly aligned, as described in the procedure:  Refer to op.. 7005A14  front side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment1. Loosen the bolts.2. Use the bolt slots to move the striker into the correct position.

Fit shims if necessary in order to adjust the striker accurately. Permitted adjustment movements are indicated by arrows.

Check the striker and catch fit together properly and are aligned when the door is closed. Tighten the striker bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STRIKER ON FRONT SIDE DOOR PILLAR	M8	2.4