2753085 - 7010A10 rear side door - adjust striker and adapt seal if necessary

Before altering the position of the door striker, ensure the door is properly aligned, as described in the procedure.  Refer to op.. 7010A14  rear side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment1. Loosen the bolts.2. Use the bolt slots to move the striker into the correct position.

Fit shims if necessary in order to adjust the striker accurately. Permitted adjustment movements are indicated by arrows.

Check the striker and catch fit together properly and ensure the door is aligned when closed. Tighten the bolts fixing the striker to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STRIKER ON REAR SIDE DOOR PILLAR	M8	2.4