2753091 - 7010B14 rear side door catch striker r r

Removing ( Refitting ) 1. Undo the retaining bolts.2. Remove the striker. Refitting ( Removing ) Check that the striker is undamaged.Fit the striker.1. Screw in the retaining bolts without tightening.2. Use the bolt slots to move the striker into the correct position.

Fit shims if necessary in order to adjust the striker accurately. Permitted adjustment movements are indicated by arrows.

Shut the door and check that the striker and door lock match properly and are aligned when the door is shut.Tighten the striker fixing bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STRIKER ON REAR SIDE DOOR PILLAR	M8	2.4