2753108 - 7010D35 rear side door manual window glass-r r
Removing ( Refitting ) Disconnect the battery negative terminal. - 7010D38 rear side door manual window mechanism handle/ring-nut r r - 7010C44 interior handle panel - r r - 7010E10 rear side door inner panel - r r or replace - 5570T93 REAR SIDE LOUDSPEAKER. (one), left or right - R.R. with rear door panel or wing. removed - 7010A05 rear side door water guard protection-r r or arrangePosition the glass in such a way as to be able to gain access to the safety retainer.1. Release the safety retainer (1a) and release the window (1b) from the window opening device.Raise the glass fully and support it using suitable suction pads.2. Unscrew the retaining nuts.3. Extract the mechanical window opening mechanism from the inside of the door frame.
Refitting
(
Removing
)
Place the mechanical window
opening mechanism inside the door frame and tighten the fixing nuts.Support the window manually and remove
the suction pads fitted previously.Lower the window sliding it slowly as far
as the safety retainer.Connect the drive pin to the window opening
device and attach the safety retainer.Check that the window opening device is
working properly and that the glass is sliding correctly. - 7010A05 rear side door water guard protection-r r or arrange - 5570T93 REAR SIDE LOUDSPEAKER. (one), left or right - R.R.
with rear door panel or wing. removed - 7010E10 rear side door inner panel - r r or replace - 7010C44 interior handle panel - r r - 7010D38 rear side door manual window mechanism handle/ring-nut
r rConnect the battery negative terminal.