2753128 - 7015B34 lock block - r+r with handle or support removed
Removing ( Refitting ) 1. Partly release the seal.2. Adjust the fastening clips (2a) and remove the lock barrel support (2b).Take great care not to damage the clips. |
1. Insert the ignition key in the lock barrel.2. Remove the retaining clips.3. Extract the lock barrel.
Refitting
(
Removing
)
Fit the lock barrel in the
support and secure it using the special fastening clip.Remove the ignition key.Place the lock barrel support in the housing
in the exterior handle.