2753192 - 7040A97 facia trim support beam - r r
 | Before working on the airbag system, the following preliminary operations must be carried out: (1) place the ignition key in the OFF position and extract it; (2) disconnect the battery terminals and insulate them (3) wait for at least 10 minutes before continuing. |
 | FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM) |
Removing
(
Refitting
)
- 5580C18 air bag module - r+r | Before removing the steering wheel, position the wheels as parallel as possible to the longitudinal axis of the vehicle. |
Refitting
(
Removing
)
- 7040A98 instrument facia trim
support beam - r r with facia removed - 7210E36 R.R. FRONT SIDE DOOR
(Both)
- 7040L42 sill plate connection of one front door (1), lh or
rh - r r
(Both)
- 7040A10 instrument facia trim - r+r - 7040A17 air conditioner controls - 5020B22 heater control support control (one) - arrange
(All)
- 7040A56 switch panel/support(push buttons)-r r - 7040A72 UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R
. - 7040A78 radio compartment box r r - 5580C22 AIR BAG MODULE - Passenger side - R.R. - 5010C14 top outlet (one) on fascia - r+r
(Both)
Fit the compartment as described in the
procedure: - 7040A18 glove compartment on facia - arrange - 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger
'AIR BAG - R.R. - 7040A37 fuse box cover - r r - 7040A28 TRIM on gearbox control panel - R.R. - 5560B10 analogue control panel - r+r - 7040A23 frame of instrument panel on facia - r r - 5550A10 stalk unit assembly - r+r - 7040A26 steering column trim - r+r - 4110A10 steering wheel - r+r for replacement or checks - 5580C18 air bag module - r+rIf the vehicle is equipped with air conditioning,
carry out the following procedure: - 0010T84 coolant for air conditioning system dehydrate and
recharge - 0010T21 coolant check density and top up if necessaryConnect the battery terminals.Check the operation of the Air Bag system
using the Examiner or other diagnostic equipment.