7040A98 INSTRUMENT FACIA TRIM SUPPORT BEAM - R R WITH FACIA REMOVED - Fiat - PANDA - eLearn

2753193 - 7040A98 instrument facia trim support beam - r r with facia removed

) - 7040L42 sill plate connection of one front door (1), lh or rh - r r (Both) - 7210E36 R.R. FRONT SIDE DOOR (Both) 1. Disconnect electrical connections (1a) and (1b).

	Name	Connector
1a	Ignition switch	H1B

	Name	Connector
1b	Aerial for Fiat-CODE	P91

2. Release the wiring from the fastenings on the dashboard crossmember.3. Undo the front nuts (3a) and the rear bolts (3b).4. Release the steering column from the dashaboard supporting crossmember and position it on the floor.

1. Undo the retaining bolts.2. Release the diagnostic connector and fuse holder.

1. Undo the retaining bolts.Partly extract the Body Computer.2. Disconnect the electrical connections.

	Name	Connector
2	Body computer	M1A

	Name	Connector
2	Body computer	M1B

	Name	Connector
2	Body computer	M1C

	Name	Connector
2	Body computer	M1E

	Name	Connector
2	Body computer	M1F

	Name	Connector
2	Body computer	M1H

	Name	Connector
2	Body computer	M1I

	Name	Connector
2	Body computer	M1L

	Name	Connector
2	Body computer	M1N

	Name	Connector
2	Body computer	M1O

	Name	Connector
2	Body computer	M1P

3. Remove the Body Computer.

Refitting ( Removing

) Place the heater/air conditioning casing in position on the dashboard supporting crossmember and tighten the nuts and the bolt.Position the dashboard wiring the dashboard supporting crossmember and secure it using suitable bands.