2753270 - 7050A50 GUIDES for moving rear seat - R.R. with seat removed
Removing
(
Refitting
)
1. With the seat at the bench and resting on a clean surfact to
avoid staining the fabric, cut the two plastic bands.2. Release the upper fastening clips.3. Release the lower fastening clips.
1. Remove the single cushion assembly from the frame, also releasing
it from the rear seat belt rods.
1. Disconnect the seat sliding cables from the housing in the guides.2. Undo the retaining bolts.3. Remove the guides from the cushion frame.
Refitting
(
Removing
)
Fit the guides in the cushion
frame housing.Tighten the guide fixing bolts to torque.Connect the seat sliding cables in the
housing in the guides and in the release devices.Working on the handle assembly, check the
operation of the release devices and the sliding of the guides.Fit the single cushion assembly in the
housing on the frame, taking care to position the rear seat belt
rods correctly in the housings in the actual cushion. Attach the upper and lower cushion clips
to the frame.Using new plastic bands, fasten the cushion
to the frame near the handles for moving the seat.
Removing
(
Refitting
)
1. With the seat at the bench and resting on a clean surfact to
avoid staining the fabric, cut the two plastic bands.2. Release the upper fastening clips.3. Release the lower fastening clips.
