1. Starting from the left or right side area, lift up the cover
and cut the fastening clips.
1. Cut the fastening clips in the centre (1a) and side (1b) areas.2. Separate the squab cover from the padding.
Refitting
(
Removing
)
Check that the cover is intact
and that there are no signs of wear or cuts.Fit the trim to the padding.Using the special pliers, cut the new clips
starting from the centre sections and continue with the two side areas.
Removing
(
Refitting
)
- 7050A53 Split, (two seater),
BACKREST COVER - Replacement1. Open the two retaining rods (1a) and release the rear section
of the cover (1b) from the upholstery (1c).
