2753372 - 1016E14 single cylinder head valve guides - replace during operation 1016e10

Removing ( Refitting ) 1. Remove valve guides (1a) using tool (1b).

	Name	Country
1b	Drift	1.860.395.000

Refitting ( Removing ) Measure the valve guide seats and check they are within the specified limits.

	Measurement		Value
-	Diameter of valve guide bore in cylinder head (mm)		12.950 - 12.977

If necessary, ream the valve seat.Check the measurement of the new valve guide.Make a note of the measurment of the valve seat after reaming.Valve guides are supplied as spares with the diameters shown below.

	Measurement		Value
-	Valve guide external diameter (mm)	Exhaust	13.030
Inlet	13.010

The interference fit between valve guides and seats on the cylinder head is as follows.

	Measurement		Value
-	Clearance between valve guide - bore in cylinder head (mm)		0.033 - 0.080

Before fitting the new valve guides, the cylinder head has to be heated to a temperature of around 80 - 100 ° C.1. Fit the valve guide oil seals (1a) using tool (1b).

	Name	Country
1b	Fitting tool	1.860.750.000

If the valve guides have undergone slight deformation during assembly, ream the inner surfaces using a reamer of appropriate size.Measure valve guide bore afer dressing and clearance between bore and valve; check they are within specified values.

	Measurement		Value
-	Valve guide internal diameter (mm)		7.022 ÷ 7.040

	Measurement		Value
-	Inlet and exhaust valves - valve guides clearance (mm)		0.022 - 0.058