2753505 - E2010 SIDE LIGHTS / NO. PLATE LIGHTS - Functional description
Functional description
The side light/number plate light activation command is issued by stalk unit H005, by turning lever group A to position 1.Body computer node MOO1:
- receives a negative signal (relating to earth C020 connector B) at pin 7 connector P.
 | Earth C020 is secured to the floor and positioned near the right front wheel arch (footwell area). |
Once it receives the signal, it turns on the side lights:
- from pin 14 and 15 connector C, supplies the side lights housed in front light clusters F010 and F011;
- from pins 11 and 12 connector F, supplies the side lights housed in tail-lights F030 and F031;
- from pins 5 and 14 connector F, supplies the number plate lights housed in light unit F055;
- from pin 9 connector L, via short-circuiting junction D097E, supplies an instrument lighting signal See E2530 INSTRUMENT LIGHTING .
The body computer monitors the correct operation of the light system and indicates any faults by turning on the light failure warning light on instrument panel E050 under the following conditions:
- load open;
- short-circuit to earth;
- short circuit to +battery.
Once it has received the signal, it turns on the sidelights:
- from pins 14 and 15 connector C, it supplies the side lights housed in front light clusters F010 and F011;
- from pins 11 and 12 connector F , it supplies the side lights housed in tail-lights F030 and F031;
- from pins 5 and 14 connector F, it supplies the number plate lights housed in light unit F055.