All operations should be carried
out taking great care to avoid injury to persons.The engine compartment contains numerous
moving parts, components at high temperatures and electrical wiring
with voltage.Closely observe the following precautions
when carrying out operations in the engine compartment:Switch off the engine and wait for it to
cool down.Do not smoke.No naked flames.Makre sure that an extinguisher is at hand
in the work area.For some procedures, the use of special
tools is indicated. The use of these tools is vital in order to
work safely.Follow the safety instructions in force
for workshop procedures. Where necessary, the Manual contains specific warnings
to prevent the risk of dangerous situations.When using chemicals, closely follow the
safety instructions given on the safety sheet which the supplier
must give to the user (in Italy, in accordance with M.D. no. 47/1992).Before working on the electrical system
(connectors, electrical components, wiring etc.), turn the ignition
off (STOP position) and DISCONNECT THE BATTERY.All the operations should be
carried out taking great care not to damage the components.In order to release parts which are sticking,
tap gently with an aluminium or lead hammer if iron materials are involved:
use a wooden or resin hammer for light alloy parts. use a wooden
or resin hammer for light alloy parts.When dismantling, check that the components
have reference marks.During refitting, lubricate the parts as
necessary to prevent seizure during the initial period of operation.When refitting, it is vital to follow the
recommended tightening torques and adjustment data.During each refitting, replace the gaskets,
oil seals, spring washers, safety plates, self-locking nuts and
all components which have deteriorated.