1. Unscrew the bolts securing the left rear differential mount.2. Remove the rear differential left mount.3. Tighten the bolts securing the right rear differential mount to the rear suspension beam.
1. Position a hydraulic lift wit a plate (1a) and brackets (1b) to support the rear differential and secure to the differential.
Description
Code
Function
1a
Plate
1.870.856.000
Support
Description
Code
Function
1b
Brackets
1.870.847.000
Support
1. Unscrew the bolt securing the rear differential to the rear mount.2. Unscrew bolts (2a) securing stabiliser bar (2b) to the mounts and release.
Lower the lift and simultaneously release the rear half-axles from the coupling seat on the differential.1. Remove the rear differential.
Refitting
(
Removing
)
Raise the rear differential and at the same time fit the rear half-axles in their seat on the couplings on the differential.Tighten the bolt securing the differential to the rear mount to torque.
Value daNm
Fastening
Component
Ø
-
10
Bolt
-
M12 X 1.25
Tighten the bolts securing the rear stabiliser bar to the mounts to torque.
Value daNm
Fastening
Component
Ø
-
3.5
Bolt
-
M8
Remove the hydraulic lift and plate and the support brackets.
Description
Code
Function
-
Plate
1.870.856.000
Support
Description
Code
Function
-
Brackets
1.870.847.000
Support
Fit the left differential mount in its seat and tighten the bolts securing it to the differential to torque.
Value daNm
Fastening
Component
Ø
-
8
Bolt
-
M10 X 1.25
Tighten the bolts securing the differential mounts to the rear suspension beam to torque.
Value daNm
Fastening
Component
Ø
-
8
Bolt
-
M10 X 1.25
1. Unscrew the plug and top up the differential fluid level.
Removing
(
Refitting
)
Op. 2410A52 VISCOUS JOINT BETWEEN THE TRANSMISSION SHAFTS - R.R. FOR PERMANENT VERSION Op. 1076B11 FULL EXHAUST PIPING - R.R. FOR FOUR-WHEEL DRIVE MODELSArrange a suitable container to collect the differential fluid.1. Unscrew the plug and drain the rear differential fluid.
