2752655 - 1820A26 thrust bearing linkage - r + r with gearbox removed

Removing ( Refitting )  - 1820A30  thrust bearing - r + r with gearbox removed1. Open and remove the circlip (1a) and remove the thrust bearing control lever (1b). 1. Release and remove the fork shaft and keep the upper and lower bushes. Refitting ( Removing ) Check the condition of the removed components.Replace the bushes, if there is too much play on the fork shaft.Refit the fork control shaft.Position the thrust bearing control lever and secure it to the fork shaft using the special circlip. - 1820A30  thrust bearing - r + r with gearbox removed